材質資訊

 
  我們的矽膠性能
  優異的加工性能、 良好的物理性能、 符合ROHS 認證。
項目 單位 檢測數據
外觀 ------ 半透明
硬度 g/cm³ 1.2±0.05
密度 Shore A 70±3
可塑性 0.01 mm 250±50
抗張強度 Mpa ≧6
伸張度 % ≧200
撕裂強度 N/mm ≧18
線性收縮率 % 3.2±0.3












  我們的矽膠檢測結果

  半透明矽膠(TRANSLUCENT SILICONE)經SGS重金屬檢測,通過。
  
檢測項目 單位 偵測極限值 結果
鉛(Pb) mg/kg 2 未檢出
鎘(Cd) mg/kg 2 未檢出
汞(Hg) mg/kg 2 未檢出
六價鉻(VI) mg/kg 8 未檢出
多溴聯苯(PBBs) mg/kg - 未檢出
多溴二苯醚(PBDEs) mg/kg - 未檢出

 
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PRODUCT DATA SHEET
Silicone Rubber HR-700U

1. Product Description
HR-700U is general purpose type heat cured compounds for compression molding.
Key Performance Properties :
- Excellent process ability, well balanced physical properties
- Suitable for use under the ROHSFDA21 CFR 177.2600
2. Applications
Suitable for all kinds of high required molding and extrusion products
Ex: O-ring, Gasket, Sheets, Key pad

3. Handling Precautions
- Wear eye protection and protective gloves when handling this product.
- Appropriate ventilation system is advisable for the curing process.
4. Safety and storage
- The shelf life is 6 months from the date of manufacture with unopened package. Storage beyond the shelf life does not necessary mean the product in the box is no longer usable. However, is advisable to checked on the properties required for the intended use for quality assurance reasons.


XIAMETER® RBB-2420-40 Base

FEATURES
40 Shore A Hardness
High translucency
High tear strength
Good Processability
Formulated to meet BfR Recommendation XV and FDA 21 CFR 177.2600

APPLICATIONS
Excellent tear strength
High transparency
Specially designed for baby nipple application and food contact applications.
Die casting,LOGO
Extrusion, tubing and profiles

Properties obtained using 1.0 phr RC-4(50P) on 2mm thick slabs, press cured 10 minutes at 170°C, and post cured 4 hours at 200°C.
*ASTM: American Society for Testing and Materials.
Materials were tested according to Dow Corning Corporate Test Methods (CTM), which in most cases are similar to the ASTM standard listed above. Copies of CTMs are available on request.

FOOD CONTACT
This product has been formulated to meet applicable food contact regulations and recommendations (for example: FDA 21.CFR 177.2600 and BfR Recommendation XV).
Note: It remains the manufacturers’ responsibility to test the final product.
For further details on the suitability of this product for food contact applications, please refer to the Food Regulatory Profile.
This information is available from your local XIAMETER Representative.


XIAMETER® RBB-2420-70 Base

70 Durometer, translucent, uncatalyzed Silicone Rubber Base
FEATURES
70 Shore A Hardnesss
High translucency
High tear strength
Good Processability
Formulated to meet BfR Recommendation XV and FDA 21 CFR 177.2600
APPLICATIONS
Excellent tear strength
High transparency
Specially designed for baby nipple application and food contact applications.
Die casting, LOGO
Extrusion, tubing and profiles

Properties obtained using 1.0 phr RC-4(50P) on 2mm thick slabs, press cured 10 minutes at 170°C, and post cured 4 hours at 200°C.
*ASTM: American Society for Testing and Materials.
Materials were tested according to Dow Corning Corporate Test Methods (CTM), which in most cases are similar to the ASTM standard listed above. Copies of CTMs are available on request.

This Silicone Rubber Base can be blended with other durometer silicone rubber bases and extended fillers to produce materials with modified durometers and properties.
FOOD CONTACT
This product has been formulated to meet applicable food contact regulations and recommendations (for example: FDA 21.CFR 177.2600 and BfR Recommendation XV).
Note: It remains the manufacturers’ responsibility to test the final product.
For further details on the suitability of this product for food contact applications, please refer to the Food Regulatory Profile.
This information is available from your local XIAMETER Representative.


SH1032U
Product Description
SH1032U are general-purpose extrudable silicone rubber
which has durometer of 38. The compounds are designed
to accept moderate to high levels of reinforcing or
extending fillers and additives for property variation. They
can be blended with each other in any proportion to
achieve intermediate shore hardness.
Key Performance Properties
- Simplicity and accuracy in compounding
- Formulation versatility to achieve and use requirements
- Easily compounded and fabricated using conventional
Techniques
Applications
SH1032U have many different uses, being suitable for
molded articles and extrusions such as seals, sheets,
tubing and profiles.

Handling Precautions
Wear eye protection and protective glove when handling this product
Material Safety Data Sheets are available upon request from KCC

Safety and Storage
Use it within 12 months from the date of manufacture
Store in a cool dry place out of direct sunlight
Keep out of the reach of the children

Packaging
20Kg box

Warranty Information – Please read carefully
The information contained herein is offered in good faith and is believed
to be accurate. However, because conditions and methods of use of our
products are beyond our control, this information should not be used in
substitution for customer’s tests to ensure that KCC’s products are safe,
effective, and fully satisfactory for the intended end use.
KCC’s sole warranty is that the product will meet the KCC sales
specifications in effect at the time of shipment. Your exclusive remedy
for breach of such warranty is limited to replacement of any product
shown to be other than as warranted.
KCC specifically disclaims any other express or implied warranty of
fitness for a particular purpose or merchantability. Unless KCC provides
you with a specific, duly signed endorsement of fitness for use, KCC
disclaims liability for any incidental or consequential damages.
Suggestions of use shall not be taken as inducements to infringe any
patent.


SH6070U
Steam Resistance
Silicone elastomer
  1. Product Description
SH6070U is general purpose type heat cured compounds
for compression molding

  1. Applications
   O-ring, Gasket, Sheets, Hose
  1. Key Performance Properties
Excellent Heat/Steam Resistance ability
Well balanced physical properties
70 durometer grade available

TSE260-7U – SVHC
With respect to the Candidate List of Substances of Very High Concern (SVHC) as published by
the European Chemicals Agency (ECHA) on July 16, 2019 as a part of the EU REACH legislation,
our product mentioned above contains the following SVHCs in an individual concentration of ≥
0.1% by weight.

This information is based on best available product and process knowledge.
These statements are for your information only, and do not constitute a warranty or product
specification.We hope this information is helpful to you. If you have any further questions please
feel free to contact us at commercial.services@momentive.com
Product Stewardship Team Europe






난연첨가제  SH0003B

제품 개요
일반실리콘 고무에 난연첨가제를 혼합 사용함으로써 난연성능을 우수하게
개선시키는 첨가제이다
중요한 성질
취급이 용이하다.
난연성능 개선 효과가 우수함
적용 분야
난연성능을 요구하는 부분


난연첨가제 SH0003B
사용기간 저장 방법
사용기간은 제조일로부터 12개월 안에 사용하십시오.
태양 직사광선을 피하시고 건조하고 선선한 장소에 보관하십시오.
아이들이 손이 닿지 않는 장소에 보관 하십시오.
보증 정보주의 깊게 읽어 주십시오.
제품 기술자료는 여러 데이터를 참조하여 작성한 것으로 신뢰할 만하고
정확하다고 판단됩니다. KCC 단독 보증은 제품이 사용 유효 기간 사이에
판매 설명서를 충족시켰을 한에서 입니다. 상기 보증의 범위 한에서 구매
자의 권리에 대한 보상은 구매단가의 환불과 보증된 다른 제품으로의 교환에
한에서 입니다. 그러나 이러한 보증 범위를 벗어나 제품을 사용할 시에 벌어
지는 우연한 사고나 &a